In the How to create a wireless network without using router? You can make your laptop a WI-Fi hotspot without using a router. First included in Microsoft Windows XP by Microsoft. How to create a wifi network in windows 7 without router. Can i make my laptop a wifi hotspot windows 7
Using command prompt to create a WIFI home or office wireless network is very easy. Creating a wireless home or office network without router using command prompt is a 6-7 step process. You can use command prompt in Microsoft windows XP, Microsoft windows 7 and Microsoft windows 8 to create an AD-hoc network (also called as virtual private network).
Command prompt method compatibility with different Windows versions:-
How to create a WIFI hotspot using CMD, Create a Wireless network Without a Router, Make laptop wifi hotspot
|Making your laptop a WIFI hotspot using CMD is compatible on following Microsoft windows editions.|
|1. Microsoft windows XP.||2. Microsoft windows 7.||3. Microsoft windows 8.|
So if you are using one of the above indicated Microsoft windows edition then you will be able to successfully use this method.
- How to create a WIFI hotspot using CMD – Create a Wireless network Without a Router, windows 7/8/10
- How to create hotspot in windows using cmd – Create a wireles network without a router
- How to create a wireless network without a router: make laptop wifi Hotspot
- Virtual Hotspot – Create Wifi Hotspot for Windows 8, Windows 7, Windows 10 without a router
- Connectify Review: Make laptop WiFi Hotspot – Create wireless Network Without Router
- mHotspot Review – Create wireless Network Without Router
- Free WiFi Hotspot – Make Laptop WiFi Hotspot – Wireless home network Without router
Let’s start than, I am using Windows 8, so, I will show you making a wireless internet home network using Command prompt (CMD) on windows 8 or windows 8.1.
Step 1 – Creating a Wi-Fi hotspot using CMD (command prompt)
Go to search tab in windows 8 and search for Command Prompt. And then right click it.
Step 2 – Create a Wireless network Without a Router
Open Command prompt (CMD) with Administrator privileges. And click yes to start CMD.
Step 3 – How to create a WIFI hotspot using CMD
Type the following command in CMD to check whether you pc supports An AD-hoc network or a virtual private network. Command is:-
- netsh wlan show drivers
After typing this command if the command prompt shows:
Hosted network supported: yes
Then your pc or laptop does supports it. Go to step 4.
Also see windows tech blog
In this step you have to create laptop hotspot on your laptop or desktop PC.
Type the following command in CMD –
- netsh wlan set hostednetwork mode=allow ssid=hotspot name here key=choose password
So, the above command will create a wireless network without router but it is still offline. Where hotspot name you can choose any and password should be at least 8 digits long.
Step 5 – How to create a WIFI hotspot using CMD
In step 5 while creating a Wi-Fi hotspot using CMD (command prompt) you have to start the newly created network by using the following command in command prompt.
- netsh wlan start hostednetwork
Type this command in the command prompt (CMD).
Step 6 – Make laptop wifi hotspot
If you want to stop the created WI-FI network you can stop this home wireless network in command prompt.
- netsh wlan stop hostednetwork
Step 7 – To see the status of your created wireless home network
If you want to see the status of wireless hotspot on your laptop or Desktop PC by using this command.
- netsh wlan show hostednetwork
Step 8 – Sharing your laptop or desktop pc home wireless connection.
This is the last step and most important one. Here, you have to share your created WI-FI network, so that from your laptop or desktop hotspot you can use Wi-Fi connection on other devices.
- Go to Network sharing then select change adapter settings. Right click on network connection you use to connect to internet and click on properties.
- From properties Go to sharing centre and select allow other network users.
You are done now. WI-FI Network or laptop hotspot is created and you can use it.
Setup a Wi-Fi Hotspot Using Virtual Router – Create a Wireless network Without a Router
Virtual Router is a free, open source software based router for PCs running Windows 8, Windows 7 or Windows Server 2008 R2. Using Virtual Router, users can wirelessly share any internet connection (Wifi, LAN, Cable Modem, Dial-up, Cellular, etc.) with any Wifi device (Laptop, Smart Phone, iPod Touch, iPhone, Android Phone, Zune, Netbook, wireless printer, etc.) These devices connect to Virtual Router just like any other access point, and the connection is completely secured using WPA2
Windows has integrated ways to create a Wi-Fi hotspot, but you should probably skip them. The open-source Virtual Router application will work better in most cases. It’s actually just a little interface on top of powerful features built into Windows — features that Windows itself doesn’t expose.
You can give your “virtual” wireless network any name you want, and also set the password to anything. Just make sure the password is at least 8 characters. You can use it in: Download Virtual router
- Bus Station
- The Park
- Grandmas House
- The In-Laws
- Absolutely Anywhere!
- 1 Getting and installing Windows 10 – Microsoft Windows 10 Full Guide
- 2 Settings menu – Microsoft Windows 10 Full Guide
- 3 Start menu – Microsoft Windows 10 Full Guide
- 4 Interface – Windows 10 Features
- 5 Features – Windows 10 Features
- 6 The Edge browser – Microsoft Windows 10
convert a Windows 10 in a hotspot emitting Wi-Fi
- Open terminal: Windows 10 incorporates a new and useful feature that allows you to open it in managed mode by right-clicking on the start menu button. It is a good shortcut, it is found in ” System Symbol (administrator) “.
- Enter the following command: change the “AdHoc” after SSID to put a custom name to the network and change “password” after key to idem.
netsh wlan set hostednetwork mode=allow ssid=AdHoc key=password
- Now run:
netsh wlan start hostednetwork
- Go to Network Connections within Control Panel> Network and Internet. Cortana is more than willing to help if you ask her or if you type it directly into the search box.
- There should already appear our connection newly created under the name of “MyWiFi”. For this network to work, it must share an existing internet connection, which can be done by selecting the current and specified network. For them, right click on your current connection , via Ethernet, and select “Properties”.
- Under the “Share” tab, check the box “Allow other users of this network to connect through the internet connection of this equipment”, in the drop down menu below select your current network . Click Ok.
- To delete and stop everything:
netsh wlan stop hostednetwork
And, basically, that’s it. It can be useful depending on what situations. For example, travel if we do not know the WiFi key of a router but we do have access via LAN (the laptop is connected, the network is created and the other devices, mobile phones and tablets are connected, for example) or if the router has Started to fail.
To start: this is not new, you could do it by touching some strings and moving some hidden backs of the system in previous versions of Windows. That said, with Windows 10 is noticeably easier and all it requires is to write a couple of lines in the terminal and change a pair of settings.