Solve iPhone stuck on apple problem

iPhone stuck on apple? “I have an iphone 6s I made an update, it was turned off, I connected it and it left the screen blank with the black apple, the worse thing is that it does not serve me the top start button, what should I do?”

iPhone stuck on apple? “My iPhone does not start, it stays in the apple when I install iOS 10.3. When connecting it  itunes does not recognize iPhone.”

Try this to solve – iPhone stuck on apple: Hold both the home and power buttons at the same time. When the Apple boot logo appears, let go of the power button but continue holding the home button.Solve iPhone stuck on apple problem

Many users encounter problems when Apple releases a new update for their devices. The iPhone or iPad is stunned or stuck with the logo on the screen is a problem that can happen if we are updating iOS, installing the firmware, restoring the device or jailbreak. When this happens, the apple logo appears and a process bar, it could walk very slowly and even does not advance further. So what to do when the iPhone gets stuck at home with apple or apple iPhone does not turn only after upgrading to iOS 10.3 / 10.2 / 10.1.1 / 10 / 9.3.5 / 9.3.3 / 9.3 / 9.2 / 9.1 / 9 ? iPhone stuck on apple

RECOMMENDED: Can you play PS3 games on PS4 | Free movie downloads Websites | Best Apps To Block Calls on Android Phone

Solutions to iPhone Lock when Refreshing iOS 10

Force Restart iPhone to Solve iPhone stuck on apple

Restarting to force is a common choice when the phone hangs or locks up and the screen stops responding to anything. Similar case when iPhone 6s / 6s plus / 6/6 plus does not catch stays in the apple when restoring or while updating, as well as iPhone 7/7 Plus, SE, iPhone 5s / 5c / 5 and earlier. The steps are very simple:

    1. Press the power button and Home button at the same time
    2. Hold for at least 10 seconds until it turns off and the apple appears on the display. Your iPhone is going to turn on and it will return to normal.

Recommended: iPad factory reset without password | How to Reset iPhone and iPad | How to block Adult websites | How to reset disabled iPhone | How to wipe a stolen iPhone | Reset iPhone 6 without passcode

Use DFU Mode

DFU  enables your device to communicate with iTunes even without activating bootloader. iPhone stuck on apple

Step #1. Open iTunes on your computer. Then Connect iPhone or iPad

Step #2. Turn off your iPhone or iPad. If it;s not turning off, hold on the sleep/wake button until the screen turns off. After iPhone turns off, just hold down the on/off button for 3 seconds, and After that  start pressing the Home button while still holding on the ON/OFF button. On your iPhone 7/7 Plus, you need to press the volume down button along with the ON?OFF button. Make sure to hold both the buttons for 10 seconds. Then, leave the power ON/OFF button but keep holding the Home button.

Step #3. If the screen of your device remains black and doesn’t display anything, it means you have successfully entered DFU mode.

Note: If you see the Apple logo or Connect to iTunes prompt, it means you are not in DFU Mode. You will have to repeat the process from step 1.

Step #4. You should see a popup window in iTunes. It will prompt you to restore your device. You have the option to restore your iPhone to factory settings or restore from a previous backup.

Now, that’s a good way to get your iPhone out of the Apple logo. But what if you have data that hasn’t been backed up? Or you’re getting errors when you try to restore?

Recommended: How to change png to jpg on iphone | Disabled iPhone 4 | Force Quit apps on iPhone or iPad | iPhone Whatsapp Backup | Fix iPhone is Slow Or Frozen | Delete iCloud Account from iPhone | Forgot apple password

Restore Apple iPhone from iTunes

iPhone stuck on apple? If you have previously backed up or just do not mind losing your iPhone files, you can restore your iPhone through iTunes.

    • Step 1: Connect the device with the USB cable to your computer and open itunes (if it does not open automatically when you connect it). Click “Restore iPhone …”, “Restore iPad …” or “Restore iPod touch …” in the Summary window

Note: If iTunes does not recognize the iDevice, you have to put it into recovery mode manually before anything else:

On iPhone 6s or earlier, iPad or iPod touch: Press and hold the Power On and Start buttons for at least 10 seconds, and do not release them until you see the Manzanita logo. Leave them pressed until you see the iTunes and USB logo screen.

On iPhone 7 or iPhone 7 Plus: Press and hold the Power On and Volume Down buttons at the same time. Be sure to click on them when the Apple logo appears. Keep pressing until the Recovery Mode screen appears.

  • Step 2: Once in recovery mode, click “Restore” in the popup window to perform a restore from your backup.

Use Tenorshare ReiBoot

iPhone stuck on apple? If your iPhone is stuck on the Apple logo  and the two options above do not serve you for whatever reason, as the buttons do not work, iPhone can not be put into recovery mode or DFU manually, you do not have any previously saved backups, etc., there is a totally third party tool free – ReiBoot , developed by the team Tenorshare lets you repair an iPhone that hangs on the block with a few simple clicks, without having to restore the iOS device, without using the Home and Power buttons without losing any files . It is fully compatible with all Apple device models: iPhone 7/7 Plus, iPhone SE, iPhone 6s / 6s Plus / 6/6 Plus, iPhone 5s / 5c / 5, iPhone 4S, iPad Pro (9.7 inch), iPad Pro (12.9 inch), iPad Air 2 / Air, iPad mini 4/3/2 / mini, iPad 4/3/2 and iPod touch.

Step #1. Download and open Tenorshare ReiBoot (Mac | Win)

Step #2. Connect your iPhone

Step #3. Click on Exit recovery mode.

This might fix the iPhone stuck on apple Logo problem. if not please comment below?

Leave a Reply